Vanraam Husky User Manual page 21

Hide thumbs Also See for Husky:
Table of Contents

Advertisement

Charging the Battery
For the best performance and to prolong the
life of the battery, we recommend that you
charge the battery at home at room
temperature.
To charge the battery:
1. Unlock the battery by turning the key a
quarter.
2. Push down the lock while pulling the
battery with your other hand.
3. Take the battery pack inside. First
connect the charger to the plug-ensure
contact of the battery. The magnetic plug
of the charger directly connected properly
to the battery.
4. Then connect the charger plug into the
mains socket. Turn the switch [A] on. A
green LED light on the charger will start to
blink fast. Now the battery will recharge.
Beware! If the battery is not
connected properly, the green LED
light blinks slowly. In case of a poor
contact, the connector of the
charger needs to be cleaned.
5. Depending on the battery level, the
charging time is about 2,5 hours for a
battery of 11,2 Ah and 6 hours for a
battery of 24,8 Ah.
6. Once the battery is fully charged, the
green LED light stays on. First pull the
plug from the mains socket or turn the
switch [A] off.
7. Then pull the connector from the battery.
8. Put the battery back in the holder of the
cycle and close the lock.
If necessary, the battery can also be charged
directly on the cycle.
Do not wait until the battery is completely empty. It is better to top-up the
battery regularly.
User manual
Tricycles 17.04
4.
1.
2.
3.
[A]
20

Advertisement

Table of Contents
loading

Table of Contents