Nose Landing Gear Installation; Accessories Name And Specification - Freewing Avanti S User Manual

Accessories Description

Nose landing gear Installation

Refer to the following diagram when assembling or disassembling the nose landing gear .

Accessories name and specification

A- E-clip (M3)
B- Nose wheel (065x16mm)
C- Nose gear axle
0- U-shape slant supporting rod
E -Pin
(03.5x10.2mm)
F - E-clip (M1 .5)
G- Nose gear steering ring
H- Spring
I -8-shape connecting arm
J - Nose strut fixed ring
K -Screws (PM2x3 1pcs)
StepO
AVANTI S
ltem No.:FJ21211
L -Pin (03.5x9.2mm)
M- E-clip(M1 .5)
N -Screw (PM2x3 1 pcs)
0- Nose gear strut
P-Pin (03.5x10.2mm)
Q-E-clip (M1 .5)
R-Grub Screw (M4x3mm)
S - L-shape steering tiller
T - Grub Screw (M3x3mm)
U - 0-shape ring
V-Pushrod
Step@
Step@
W- Rotating arm
Z- Nose metal wire
AB-Screws (PA 1.4x12 2pcs)
AC-Screws (PA1.7x10 4pcs)
AD-Screws (FA3x12 4pcs)
AE- Retract Reinforcement Plate
AF- Nose landing gear
AG- Nose steering push rod
AH-Screws (PWA2.3x8 2pcs)
Al-Servo
AJ- Nose landing gear door type A
AK- Cabin door spring
AL-Screws (PA2x8 4pcs)
AM-Spring
Step8
Nose steering pushrod size
Pushrod diameter 01. 5mm
1--- ---1
80mm
(3-118")
Servo pushrod installing hole
� Note : When installing. please check the flat position
of spare parts,when securing.the flat position must face
towards the screw hole so that it can lock the part
securely so the parts do not come loose and fall off.
EN
T
�m�DEL.
rlCCWlng