Main Landing Gear Installation - Freewing FJ211 User Manual

Landing gear Installation Instructions

Main landing gear Installation

Please assem b le and disassemble the main landing gear with
reference to the following photo and diagrams.
A-Grub screw (M3x3 1 pc).
B-Wheel lock.
C-Wheel.
D-Rear gear main strut.
E-Electric landing gear retract.
F-Grub screw (M3x3 2pcs).
:tj)
C
D
Step8
Servo parameters
A servo or reversed servo is defined as follows:
When the servo input signal changes from 1000ųs to
2000ųs, if the servo arm rotates clockwise, it's a
positive servo. If it rotates counter clockwise, it's a
reversed servo.
If you choose to purchase a different brand of servo, please refer to
the following 11st to ensure it is the correct size .
Servo position Servo regulation No. Standard/Reverse Servo cable length
Nose steering 9g Digit-Plastic
Left aileron 9g Digit-Plastic
Right aileron 9g Digit-Plastic
Left elevator 9g Digit-Plastic
Right aileron 9g Digit-Plastic
Rudder 9g Digit-Plastic
G-Assembled Main Landing
Gear.
H-Metal reinforcement plate.
I -Screw ( KA2.6x12 8pcs )
J -Main Gear cover.
�E
Step@
.. . .. -
Standard 100mm
1
2 Standard 200mm
Standard 200mm
3
4 Standard 850mm
5 850mm
Reverse
Standard 900mm
6
Step@)
' \_ /
StepC,
J
EN
F-16 Fighting Falcon
lten No.: FJ211
Version No.: FJ211-V01