Precautions; Index - Freewing Avanti S User Manual

Introduction
Thank you for purchasing our Freewing 80mm EDF Avanti S sport jet. This jet was
originally designed after the famous Italian F3A world champion Sebart fiberglass
turbo jet. We received Sebart's authorization, and design approval from Sebastiano
Silvestri and redesigned it as a smaller version electric powered sport jet so more
customers could enjoy this amazing airplane.
New Avanti S is constructed using new EPO material. Its length is 1300mm and its
wingspan is 1236mm.
assembly and disassembly and easier to transport . Coupled with a new Freewing 80mm
12-blade EDF power system with 1 00A ESC this airplane will deliver a strong enjoyable flight.
Avanti S has excellent flight stability and easily performs all
coupled with great slow speed characteristics allowing the pilot easy gentle landings.
The Avanti S electric sport jet is great for pilots who love aerobatics, as well as an
excellent primary EDF jet trainer .
& NOTE:
This is not a toy. Not for children under 14 years. Young people under the age of 14
should only be permitted to operate this model under the instruction and supervision of an
adult. Please keep these instructions for further reference after completing model assembly.

Precautions

1. This is not a toy! Operators should have some basic experience. Beginners should operate only under the guidance
of a professional instructor.
2. Before beginning assembly, please read through the instructions and carefully follow them throughout the build.
3. Freewing and it's vendors will not be held responsible for any losses due to improper assembly and operation.
4. Model airplane operators must be at least 14 years of age.
5. This airplane is made of EPO foam material, covered with surface spray paint. Don't use chemicals to clean as it may
cause damage.
6. You should avoid flying in areas such as public places, areas with high voltage power lines, nearby highways, airports
or in other areas where laws and regulations clearly prohibit flight.
7. Do not fly in bad weather conditions, including thunderstorms, snow, etc...
8. Lipo batteries should be properly stored in a fire proof container and be kept at a minimum of 2M distance away from
flammable or explosive materials.
9. Damaged or scrap batteries must be properly discharged before disposal or recycling to avoid spontaneous
combustion and fire.
10. At the Flying Field, properly dispose of any waste you have created, don't leave or burn your waste.. Ensure that
your throttle is in the low position and that your radio is turned on before connecting the Lipo battery.
11. Ensure that the throttle is in the lowest position and transmitter switch on, before connecting a Lipo Battery to the
ESC of the aircraft.
12. Do not try to catch the airplane while in flight or during landing. Wait for the airplane to come to a complete stop
before handling.

Index

Introduction
Product basic information
Package list
PNP Assembly lnsturctions
Main wing Assembly
Horizontal stabilizer Assembly
Vertical stabilizer Assembly
Nose cone Installation
Pushrod instructions
Control board connection diagram
Battery size
�mo%DEL
rlCCWlng
It also utilizes a multi plug
1
2
2
3
3
4
4
4
5
6
control board for
Center of gravity
Control direction test
Dual Rates and Flight setting
Accessories Description
Introduction
Motor Parameters
Motor Installation
Pushrod Installation
Nose landing gear Installation
Main landing gear Installation
Wing-fence
EN
easier
F3A aerobatics,
6
7
8
Servo
9
9
10
11
12
13
13
AVANTI S
ltem No.:FJ21211