Directed XPRESSKIT DBALL2 Installation Manual
  1. Manuals
  2. Brands
  3. Directed Manuals
  4. Automobile Accessories
  5. Xpresskit DBALL2
  6. Installation manual

Directed XPRESSKIT DBALL2 Installation Manual

Hide thumbs Also See for XPRESSKIT DBALL2:
Table of Contents

Advertisement

Quick Links

Download this manual
Platform: DBALL2
Firmware:
CHRYSLER8 Remote Start Ready (RSR) Installation
Update Alert: Firmware updates are posted on the web on a regular basis. We recommend
that you check for firmware and/or install guide updates prior to installing this product.
Installation Guide
This guide supports the installation of a DBALL in Remote Start Ready (RSR) mode with or without a
Plug & Play (THCHD3) T-Harness (Optional). This solution offers three (3) configuration options to
control you system: 3X OEM Lock Remote Start Activation, RF Kit or SmartStart (all sold separately).
The optional Plug & Play T-Harness THCHD3 (sold separately) provides simpler and faster installation.
Remote Start Ready (RSR) is a function that enables the interface module to remote start the vehicle
completely on its own. Consequently, there is no need for an aftermarket or an OEM remote starter in order to
start the vehicle from a distance.
Important!
This product is NOT compatible with vehicles equipped with a manual transmission.
Index
Vehicle Application Guide...................................................................................................................................................
Installation
Installation without T-Harness............................................................................................................................................
Installation with T-Harness.................................................................................................................................................
Vehicle Wiring Reference Chart.........................................................................................................................................
SmartStart/XL202 Installation Notes..................................................................................................................................
Programming
Module Programming.........................................................................................................................................................
Module Reset.....................................................................................................................................................................
Hard Reset.........................................................................................................................................................................
Feature & Option List..........................................................................................................................................................
Feature Programming.........................................................................................................................................................
LED Diagnostics & Troubleshooting...................................................................................................................................
Parking Light Error Codes..................................................................................................................................................
Limited One-Year Consumer Warranty...............................................................................................................................
Quick Reference Guide......................................................................................................................................................
SmartStart Compatible
SmartStart is equipped with D2D, which means it can be connected to an interface module and used in Remote
Start Ready (RSR) mode without the use of a remote starter. See the Module Programming section for more
information.
® Chrysler is a registered trademark and property of Chrysler Group LLC.
Rev.: 20151126
02
03
04
05
06
07
08
08
09
10
11
12
13
14
© 2015 Directed. All rights reserved.

Advertisement

Table of Contents
loading

Related Manuals for Directed XPRESSKIT DBALL2

Summary of Contents for Directed XPRESSKIT DBALL2

  • Page 1: Table Of Contents

    SmartStart is equipped with D2D, which means it can be connected to an interface module and used in Remote Start Ready (RSR) mode without the use of a remote starter. See the Module Programming section for more information. ® Chrysler is a registered trademark and property of Chrysler Group LLC. © 2015 Directed. All rights reserved.

  • Page 2: Vehicle Application Guide

    •: D2D & Wire-to-Wire (W2W) AV: Horn & Lights Controls RS: Remote Start & Engine Controls CC: Comfort & Convenience Controls SS: Integrated Security & Monitoring DL: OE Door Lock & Alarm Controls ST: Function/Feature Status © 2015 Directed. All rights reserved.

  • Page 3: Installation Without T-Harness

    Tach wire is an optional connection required on some remote starters, which do not support a tach signal in D2D. Required for RAP, heated seats, steering wheel and rear defroster control. With the exception of the OBDII Diagnostic connector, all adapters are displayed from the wire side (unless specified otherwise). © 2015 Directed. All rights reserved.

  • Page 4: Installation With T-Harness

    You can connect to either a XL202 RFTD OR a SmartStart module. Refer to the SmartStart/XL202 Installation Notes for more information. With the exception of the OBDII Diagnostic connector, all adapters are displayed from the wire side (unless specified otherwise). © 2015 Directed. All rights reserved.

  • Page 5: Vehicle Wiring Reference Chart

    IHS CAN High Gray OBDII Diagnostic Connector. IHS CAN Low White 11 OBDII Diagnostic Connector. Parking Lights White/Brown Parking Light Switch, 10-pin Black Connector. Immob. Data White/Lt. Green Ignition Node, 6-pin Blac k Connector. © 2015 Directed. All rights reserved.

  • Page 6: Smartstart/Xl202 Installation Notes

    Refer to the Passive Keyless Entry (PKE) Installation Guide (N2102T) for detailed wiring information. RF Kit, PKE & SmartStart BT Combination Refer to the Passive Keyless Entry (PKE) Installation Guide (N2102T) for detailed wiring information. © 2015 Directed. All rights reserved.

  • Page 7: Module Programming

    3 seconds. However, if the bypass was skipped, the LED turns ON solid START orange for 3 seconds. Solid Solid Key OUT Turn the ignition OFF and remove the key. START You have successfully completed the module programming sequence. © 2015 Directed. All rights reserved.

  • Page 8: Module Reset

    Wait 3 seconds until the LED turns ON solid orange, and wait 10 more seconds & until the LED starts to flash orange and red. Solid Flashes & Release the programming button. The LED turns ON solid red. Release Solid © 2015 Directed. All rights reserved.

  • Page 9: Feature & Option List

    Smart OEM Alarm Control will also monitor the remote starter actions so that the factory alarm control is not done twice. A remote starter, for which the Safelock feature is active, will work perfectly with this option and will make it invisible to the user. © 2015 Directed. All rights reserved.

  • Page 10: Feature Programming

    No activity for 30 seconds; after 30 seconds, the LED will turn ON orange for 2 seconds to confirm the end of the programming sequence. Press and HOLD the programming button for 3 seconds. After 3 seconds, the LED will turn ON orange for 2 seconds to confirm the end of the programming sequence. © 2015 Directed. All rights reserved.

  • Page 11: Led Diagnostics & Troubleshooting

    Activated from Web automatically when using RSR flash Activation was attempted Flashes red Flashes red x7 tool or can be done manually. Refer to feature when RFTD feature is programing section for more information. disabled. © 2015 Directed. All rights reserved.

  • Page 12: Parking Light Error Codes

    Brake shutdown. Hood shutdown/Remote start safety override switch is ON*. Remote start safety override switch is ON*. * If the vehicle hood status is supported through data, safety override switch input will report 7 flashes. © 2015 Directed. All rights reserved.

  • Page 13: Limited One-Year Consumer Warranty

    Part was purchased from an authorized DIRECTED dealer; and the Part is returned to DIRECTED, postage prepaid, along with a clear, legible copy of the receipt or bill of sale bearing the following information: consumer’s name, address, telephone number, the authorized licensed dealer’s name and complete...

  • Page 14: Quick Reference Guide

    Brake shutdown. Hood shutdown/Remote start safety override switch is ON*. Remote start safety override switch is ON*. * If the vehicle hood status is supported through data, safety override switch input will report 7 flashes. © 2015 Directed. All rights reserved.
  • Page 15 3 times, then to activate x3 + the panic mode. Press once, then to reset the x1 + remote starter runtime. * This output is configurable. see your authorized installation center for more information. © 2015 Directed. All rights reserved.
  • Page 16 3.0 enables a "Cloud-Connected Car" like never before, providing an entirely new level of 2-way interaction with your vehicle. Connectivity is managed through the Directed Cloud Services (DCS) network linking car, app, end user, and the Internet. For more information, visit www.mysmartstart.com.

Table of Contents