Miele H2661BP Operating And Installation Instructions page 95

Problem
 is flashing in the
display.
 is lit up or flashing in
the display.
 appears
unexpectedly in the
display and  is
flashing at the same
time. The buzzer might
also be sounding.
  appears in the
display.
  appears in the
display.
  appears in the
display.
Possible cause and remedy
There has been a power cut.
 Reset the time of day (see "Using for the first
time").
Cooking times will also need to be reset.
There has been a power cut which has caused the
Pyrolytic cleaning programme to stop.
The  symbol will remain lit up and the door
locked until the temperature inside the oven drops
to below 280 °C.
 The time of day display will start flashing as soon
as you turn the function selector to 0. Please enter
the time of day again (see "Using for the first
time").
The oven has been operating for an unusually long
time and this has activated the safety switch-off
function.
 Turn the function selector to 0. The oven is now
ready to use again immediately.
The Pyrolytic cleaning programme door lock is not
locking.
 Turn the function selector to the 0 position and
select the required Pyrolytic cleaning programme
again.
If the problem persists, contact Miele.
The door lock for the Pyrolytic cleaning programme is
not being released.
 Turn the function selector to the 0 position.
If the problem persists, contact Miele.
There is a problem that you cannot resolve.
 Call Miele.
Problem solving guide
95