High End Systems SolaHyBeam 2000 User Manual page 28

Clen LED Time
With this function you can clear the running time of the lamp. Please clear the lamp time every time
you replace the lamp.
1． Tap <MODE/ESC>button，access the main menu，Tap the <Up/Down>button until "Info" is
displayed. Press ENTER, the display will show "Info". Tap the <Up/Down>button until the display
will show "Time Info.". Press ENTER, the display will show "Time Info.".
2． Press <Up/Down>, the display will show "Clen LED Time".
3． At "Timer Password" menu input a correct password, press< ENTER>, the display will show
"Clen LED Time",
4． The display will show "OFF" or "ON".
5． Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.
Error Info
1． Tap <MODE/ESC>button，access the main menu，Tap the <Up/Down>button until "Information"
is displayed. Press ENTER, the display will show "Information".
2． Press <Up/Down>, the display will show "Error Info".
3． Press< ENTER>, the display will show "xxxxxx".
4． Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.
Value Disp.
With this function you can display the DMX 512 value of each channel. The display automatically
shows the channel with a value changing.
1． Tap <MODE/ESC>button，access the main menu，Tap the <Up/Down>button until "Info" is
displayed. Press ENTER, the display will show "Info". Tap the <Up/Down>button until the display
will show "Value Disp". Press ENTER, the display will show "Value Disp".
2． Tap the <Up/Down>button until "ALL", "PAN" is displayed.
3． Tap the <Up/Down>button，choose each channel.
4． Press ENTER to confirm or press <MODE/ESC> to return to the main menu.
Head Temperature.
With this function you can display the temperature on the display board of the base (near CMY-filter)
in Celsius.
1. Tap <MODE/ESC>button，access the main menu，Tap the <Up/Down>button until "Info" is
displayed. Press ENTER, the display will show "Info". Tap the <Up/Down>button until "Head
Temp." is displayed. Press ENTER, the display will show "Head Temp.".
2. The display show "XXX °C/ °F".
3.
Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.
Fan Speed
1. Tap <MODE/ESC> button，access the main menu，Tap the <Up/Down>button until "Info" is
displayed. Press ENTER, the display will show "Info".
2. Press <Up/Down>, the display will show "Fan Speed".
3. Press< ENTER>, the display will show "Fan Info".
4. The display show "HeadFan1: xxxxRPM", "HeadFan2: xxxxRPM".......
5. Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.
SolaHyBeam 2000 User Manual
28
v1.3