Address; Info - High End Systems SolaHyBeam 2000 User Manual

Address

With this function, you can adjust the desired DMX-address via the Control Board.
1. Access the main menu.
2. Tap the <Up/Down>button until "Address" is displayed.
3. Press ENTER, the display will show "Address".
4. Tap the <Up/Down>button，the display will show "A001~AXXX"
5. Press ENTER to confirm or press <MODE/ESC> to return to the main menu.

Info

Time info.
Current Time
With this function, you can display the temporary running time of the device from the last power on.
The display shows "XXXX", "XXXX" stands for the number of hours. The counter is reset after turning
the device off.
1. Tap <MODE/ESC>button，access the main menu，Tap the <Up/Down>button until "Info" is
displayed. Press ENTER, the display will show "Info". Tap the <Up/Down>button until the display
will show "Time Info.". Press ENTER, the display will show "Time Info.".
2. Press <Up/Down>, the display will show "Current Time".
3. Press< ENTER>, the display will show "Current Time".
4. The display will show "XXXX" (Hours) ；
5. Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.
Ttl Life Hrs
With this function, you can display the running time of the device. The display shows "XXXX", "XXXX"
stands for the number of hours.
1. Tap <MODE/ESC>button，access the main menu，Tap the <Up/Down>button until "Info" is
displayed. Press ENTER, the display will show "Info". Tap the <Up/Down>button until the display
will show "Time Info.". Press ENTER, the display will show "Time Info.".
2. Press <Up/Down>, the display will show "Ttl Life Hrs".
3. Press< ENTER>, the display will show "Ttl Life Hrs".
4. The display will show "XXXX" (Hours) ；
5. Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.
Last Run Hrs
With this function, you can display last the running time of the lamp. The display shows "XXXX",
"XXXX" stands for the number of hours
1. Tap <MODE/ESC>button，access the main menu，Tap the <Up/Down>button until "Info" is
displayed. Press ENTER, the display will show "Info". Tap the <Up/Down>button until the display
will show "Time Info.". Press ENTER, the display will show "Time Info.".
2. Press <Up/Down>, the display will show "Last Run Hrs".
3. Press< ENTER>, the display will show "Last Run Hrs".
4. The display will show "XXXX" (Hours) ；
5. Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.
SolaHyBeam 2000 User Manual
26
v1.3