High End Systems SolaHyBeam 2000 User Manual page 21

1.2. RIGGING DRAWINGS
•
The device can be rigged in any of the orientations shown in the image above.
•
The device must be kept at least 0.1 m away from any flammable materials (decoration etc.).
•
Always use and install the supplied safety cable as a safety measure to prevent accidental damage
and/or injury in the event the clamp fails.
Important:
Overhead rigging requires extensive experience, including (but not limited
to) calculating working load limits, specifying installation/ rigging materials,
and periodic safety inspection of all installation material as well as the
device. If you lack these qualifications, do not attempt the rigging of this
device yourself. Improper installation/ rigging can result in serious bodily
injury.
SolaHyBeam 2000 User Manual
21
v1.3