Preset - High End Systems SolaHyBeam 2000 User Manual

Manual control
With this function, you can adjust the lamp more easily. All effects will be canceled, the shutter opens
and the dimmer intensity will be set to 100 %. With the individual functions, you can focus the light on a
flat surface (wall) and perform the fine lamp adjustment.
1． Tap <MODE/ESC>button，access the main menu，Tap the <Up/Down>button until "Test" is
displayed. Press ENTER, the display will show "Test".
2． Press <Up/Down>, the display will show "Manual Ctrl.".
3． Press< ENTER>, the display will show "Manual Ctrl.".
4． The display show "PAN=XXX".
5． Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.
Calibration
With this function, you can calibrate and adjust the effect wheels to their correct positions. The password of
calibrate values is 050.
1． Tap <MODE/ESC>button，access the main menu，Tap the <Up/Down>button until "Test" is
displayed. Press ENTER, the display will show "Test".
2． Press <Up/Down>, the display will show "Calibration".
3． Press< ENTER>, the display will show "Calibration".
4． The display show "Password=XXXX".
5． Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.

Preset

PlayBack
DMX Control
1． Tap <MODE/ESC>button，access the main menu，Tap the <Up/Down>button until "Preset" is
displayed. Press ENTER, the display will show "Preset". Tap the <Up/Down>button until the
display will show "PlayBack". Press ENTER, the display will show "PlayBack".
2． Tap the <Up/Down>button until "DMX Control" is displayed.
3． Press ENTER, the display will show "DMX Control".
4． Tap the <Up/Down>button，choose dmx modes.
5． Press ENTER to confirm or press <MODE/ESC> to return to the main menu.
Set To Slave
With this function, you can define the device as slave.
1． Tap <MODE/ESC>button，access the main menu，Tap the <Up/Down>button until "Preset" is
displayed. Press ENTER, the display will show "Preset". Tap the <Up/Down>button until the
display will show "PlayBack". Press ENTER, the display will show "PlayBack".
2． Tap the <Up/Down>button until "Set To Slav" is displayed.
3． Press ENTER, the display will show "Set To Slav".
4． Tap the <Up/Down>button，the display will show "Slave1", "Slave2", and "Slave3".
5． Press ENTER to confirm or press <MODE/ESC> to return to the main menu.
SolaHyBeam 2000 User Manual
33
v1.3