SET
Status
No DMX Mode
With this function, when the drive is not DMX signal, it runs automatism, close, hold and music, the
default is hold.
1. Tap <MODE/ESC>button,access the main menu,Tap the <Up/Down>button until "SET" is
displayed. Press ENTER, the display will show "SET". Tap the <Up/Down>button until the
display will show "Status". Press ENTER, the display will show "Status".
2. Press <Up/Down>, the display will show "No DMX Status".
3. Press< ENTER>, the display will show "No DMX Status".
4. The display show "Hold", Press
Program" , "Music Control",.
5. Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.
Pan Reverse
With this function you can reverse the Pan-movement.
1. Tap <MODE/ESC>button,access the main menu,Tap the <Up/Down>button until "SET" is
displayed. Press ENTER, the display will show "SET". Tap the <Up/Down>button until the
display will show "Status". Press ENTER, the display will show "Status".
2. Press <Up/Down>, the display will show "Pan Reverse".
3. Press< ENTER>, the display will show "Pan Reverse".
4. The display show "OFF", Press <Up/Down>, the display will show "ON".
5. Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.
Tilt Reverse
With this function you can reverse the Tilt-movement.
1. Tap <MODE/ESC>button,access the main menu,Tap the <Up/Down>button until "SET" is
displayed. Press ENTER, the display will show "SET". Tap the <Up/Down>button until the
display will show "Status". Press ENTER, the display will show "Status".
2. Press <Up/Down>, the display will show "Tilt Reverse".
3. Press< ENTER>, the display will show "Tilt Reverse".
4. The display show "OFF", Press <Up/Down>, the display will show "ON".
5. Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.
Pan Degree
With this function, you can select pan degree for 630 or 540.
1. Tap <MODE/ESC>button,access the main menu,Tap the <Up/Down>button until "SET" is
displayed. Press ENTER, the display will show "SET". Tap the <Up/Down>button until the
display will show "Status". Press ENTER, the display will show "Status".
2. Press <Up/Down>, the display will show "Pan Degree".
3. Press< ENTER>, the display will show "Pan Degree".
4. The display show "540", Press <Up/Down>, the display will show "630".
5. Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.
Encoders.
With this function, you can feedback switch of pan movement or tilt movement.
1. Tap <MODE/ESC>button,access the main menu,Tap the <Up/Down>button until "SET" is
displayed. Press ENTER, the display will show "SET". Tap the <Up/Down>button until the
display will show "Status". Press ENTER, the display will show "Status".
2. Press <Up/Down>, the display will show "Encoders.".
3. Press< ENTER>, the display will show "Encoders.".
4. The display show "ON", Press <Up/Down>, the display will show "OFF".
5. Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.
SolaHyBeam 2000 User Manual
<Up/Down>, the display will show "Close Shutter", "Auto
30
v1.3