Switching On/Off; Switching The Headset On; Switching The Headset Off; Switching The Base Station Off - Sennheiser VMX Office Instruction Manual

The speaker
two directions so that you can
wear the headset on either
your left or right ear without
changing it. However, the
speaker is designed so that
other people in the vicinity
cannot listen to the other
party and are not disturbed by
the speaker.

Switching on/off

Switching the headset on

Open the microphone boom
A call is answered immedi-
ately from the last used
device by opening the
microphone boom without
any further action (there
might be a little delay
depending on the type of
mobile phone used).

Switching the headset off

Close the microphone boom.
All settings are saved when
the headset is switched
off.

Switching the base station off

Unplug the power supply.

Switching the base station on

Connect the base station to the mains
as described on page 7.
16

Basic telephoning

operates in
Provided the headset is switched on and
in transmission range of either the base
station or the mobile phone or both (see
page 19), you can accept and make calls.

Accepting a call via the base station

When you receive a call either via your
OFFICE or PC phone
tone in the speaker
headset LED
flash quickly.
To accept the call from a fixed line phone
when the headset is already switched
.
on:
Press
– the hook button
call from the phone or PC or
– the PHONE button
answer calls from the phone.
A wireless link is established between
base station and headset.
If no automatic handset lifter is
installed on your fixed line phone,
pick up the phone handset manually.
The link to the phone is established.
Start to talk.
1)
Only if you use a handset lifter with ring
tone detection or the TCI 01 box or the
Sennheiser Communications USB call con-
trol software.
1)
you hear a ring
. In addition, the
and the PHONE LED
to answer any
·
( ) to
If an automatic handset
lifter is installed on your
phone, it picks up the
handset automatically.
»