If You Leave The Dect Range; Switching Between Phone And Pc Mode; Calling Via The Fixed Line Phone Using The Headset - Sennheiser EPOS SD Series User Manual

Making calls using the headset

If you leave the DECT range

In normal office buildings, the range between headset and base station is
up to 55 m. If, during a call, the audio quality deteriorates or the link breaks
down completely, you hear a descending sequence of beeps in the headset.
The Link LED on the base station lights up red.
Re-enter the DECT range of the base station within 60 seconds.
You hear a ring tone in the headset.
Press the Link button on the headset to resume the call.
55 m
If your softphone supports call control, the call will automatically be
ended 60 seconds after leaving the DECT range.

Switching between Phone and PC mode

Press the PC button
select the desired mode.
The button pressed (PC
selected mode.
22 | SD Series - User Guide
or the Phone button on the base station to
or Phone ) is backlit in white, indicating the
Making calls using the headset

Calling via the fixed line phone using the headset

If you want to use the headset to accept, make or end calls, you have to
establish a wireless link between headset and base station. You can choose
between manual and automatic link establishment (see "Auto Link" on
page 16):
Switch position
Managing calls without using a call control functionality
Accepting a call: You hear the ring tone of the fixed line phone.
Press the Link button on the headset.
Lift the handset or press the "accept call" button on your fixed line
phone.
Making a call:
Press the Link button on the headset to establish a link between base
station and headset.
Lift the handset and dial the desired number.
The phone connection is established.
Ending a call:
Hang up the handset or press the "end call" button on your fixed line
phone.
Function
Manual link establishment
When taking the headset out of the base station,
you have to manually establish the wireless link
between headset and base station.
Automatic link establishment – Auto Link
When taking the headset out of the base station,
a wireless link is automatically established between
headset and base station.
SD Series - User Guide | 23