Using The Headset; Switching The Headset On; Establishing A Wireless Connection (Bluetooth Or Low Latency Channel) - Sennheiser GSP 670 User Manual

11

UsInG the heADset

Using the headset

Switching the headset on

click
turn the main volume wheel clockwise over a slight resistance.
the LeD flashes green 3 times. the voice prompt "power on" is announced in the headset. If the headset is not
connected via the USB cable, it automatically tries to establish a connection to wireless devices.

Establishing a wireless connection (Bluetooth or low latency channel)

the headset searches paired devices to connect to. once the connection is successfully established, one or two of the
following voice prompts are announced in the headset:
• "Device connected" for a smartphone or
• "Dongle connected" for the dongle.
If the headset does not find a paired device to connect to, it automatically switches to sleep mode after 15 min.
GSP 670 Wireless headset |
A
"Phone
connected"
GSA 70 Dongle
3x
"Power on"
After switch-on, the headset automatically tries to
connect to two of the available paired wireless devices.
to connect a third device:
Deactivate any active wireless connection to the
headset, and enter pairing mode (see page 6 for
pairing mode).
B
3x
3x
"Dongle connected"