Switching The Headset On/Off - Sennheiser FLX 70 Instruction Manual

Up to five hours talk time

Hide thumbs Also See for FLX 70:

Table of Contents

• The LED

flashes red.

• Three beeps are heard in the speaker 3 times with an interval of 15

seconds and thereafter with an interval of 2 minutes.

• Less than 10 minutes of talk time are left.

Switching the headset on/off

Press the hook button

up blue.

The headset is switched on. The LED

cates the current operating mode:

– If the LED

headset is already paired to a mobile

phone. The headset is therefore ready to

use.

– If the LED

and blue, the headset is not yet paired to

a mobile phone. Pair it as described under "Pairing the headset to

mobile phones or other Bluetooth devices" on page 13.

– If the headset is already paired to a mobile phone and if there is

an incoming call on your mobile phone, the call is answered imme-

diately by a single tap on the hook button ´.

To switch off the headset:

Press the hook button

flashes red and then turns off.

All settings are saved. The battery lasts longer, if you switch off the

headset when you are not using it.

for more than 3 sec. until the LED

flashes slowly in blue, the

flashes alternatingly in red

indi-

for more than 3 sec. until the LED

lights

Table of Contents