Switching The Headset On/Off - Sennheiser Presence Instruction Manual

Using the headset
paired +
paired
connected
16 | Presence

Switching the headset on/off

Switching the headset on and connecting it
The headset can save the connection profiles of up to eight Bluetooth
devices with which it has been paired ("paired", see page 12). However,
only two of the paired Bluetooth devices can be simultaneously connected
to the headset ("paired + connected"). After switch-on, the headset
automatically tries to connect to the two last connected Bluetooth devices.
Enable the Bluetooth visibility on one or two of the paired Bluetooth
devices. If necessary, disable the Bluetooth visibility on other paired
Bluetooth devices in the proximity of the headset.
Gently slide the power on/off slider away from the headset. The LED
flashes blue 3 times. The voice prompt "power on" is announced in the
headset.
The headset can connect to up to two of the paired mobiles phones or
Bluetooth dongles. The LED flashes 3 times blue every 2 seconds and
goes off once a connection to the first Bluetooth device is successfully
established. One or several of the following voice prompts are
announced in the headset:
– "Phone one connected" for the first mobile phone
– "Phone two connected" for the second mobile phone or
– "Dongle connected" for the Bluetooth dongle.
3x
Switching the headset off
Slide the power on/off slider away from the headset.
The voice prompt "power off" is announced in the headset and the LED
flashes red 3 times. The headset
3x
Connection profiles and volume settings are saved automatically
when the headset is switched off.
1. "power on"
2. „... connected"
ends the call and switches off.
"power off"