Using The Hme 110; Switching Between Mono And Stereo Operation - Sennheiser HME 110 Instruction Manual

Using the HME 110

Using the HME 110
Switching between mono and stereo
operation
In general, you'll receive a mono sound source so that the
mono/stereo switch can remain set to "MONO" (factory
setting).
To set the headset to stereo operation:
Remove the ear pad (see "Replacing the ear pads" on
page 14) from the ear cup with the microphone boom
attached.
Set the mono/stereo switch to "STEREO".
HME 110 | 9