Setting Up; Connecting The Base Station To The Mains; Connecting The Base Station To A Fixed Line Phone; Type 1 - Sennheiser VMX Office Instruction Manual

Setting up

Upon delivery, the headset and the base
station are pre-paired together. You just
have to:
1. connect the base station to the mains
2. connect the base station to your
fixed line phone and/or PC
3. pair the headset to your mobile
phone.
Connecting the base station to
the mains
Connect the power supply to the
DC IN socket and to the mains.
All LEDs light up for 2 seconds.
Connecting the base station to
a fixed line phone
There are three different types of fixed
line phones:
1. fixed line phones with headset socket
2. usual fixed line phones
3. fixed lined phones featuring a DHSG
interface

Type 1:

Connecting the base station to a fixed
line phone with a headset socket
If there is a dedicated headset socket at
your phone, it should be used.
Please refer to your fixed lined
phone manual to find out which
socket should be used for con-
necting.
Connect the cable which is already
connected to the base station
(PHONE socket ¸) to the fixed line
phone headset socket.
To test the phone connection:
Pick up the handset.
If the dial tone is heard in the hand-
set, the system is connected properly.
If no dial tone is heard, please refer to
"Adjusting to your fixed line phone"
on page 12.
¸
7