Switching The Wireless Headphone System On - Sennheiser Set 860 Instruction Manual

Using the Set 860

Switching the wireless headphone system on

WARNING
Vol +
Danger due to high volume levels!
This receiver allows you to set higher volumes than conven-
tional devices. Constant high-volume use can cause hearing
Vol -
damage.
b
b
b
1
VOLUME
2
Before putting the stethoset receiver on, set the volume on
the receiver to a low level.
Do not expose yourself to high volume levels for extended
periods of time.
Use a hearing profile (see page 24) that improves especially
speech intelligibility without the need for a high volume.
Switch your audio source on.
If the transmitter is connected to the headphone socket
(see page 12) of your TV/audio source, adjust the volume of
the headphone socket on your TV/audio source to at least
a medium level.
Take the stethoset receiver out of the transmitter's
charging compartment and pull the ear bows apart so that
you can put the receiver on.
The stethoset receiver automatically switches on when you
pull the ear bows apart. The transmitter automatically
switches on and the
or blue. The audio transmission starts.
The remaining operating time of the stethoset receiver is
displayed on the transmitter (see page 17).
1 2
ON
Transmitter status
LED lights up white
ON
Using the Set 860
Set 860 | 19