Connecting The Base Station With Uusb 7 Socket To The Computer Sound Card; Connecting The Base Station To A Usb Socket Of A Computer - Sennheiser VMX Office Instruction Manual

Connecting the base station with
UUSB 7 socket to the computer sound
card
UUSB 7
Connect the RJ 9 plug of the acces-
sory cable (not included):
– to the AUX/DHSG socket
use a usual fixed line phone or no
phone at all
– to the PHONE socket
fixed line DHSG phone
Connect the cable with the UUSB 7
plug to the RJ 45 plug of the acces-
sory cable (not included).
Connect the UUSB 7 plug to the
UUSB 7 socket of the computer sound
card.
To test the PC connection
Before testing make sure
the PC works accordingly.
Make sure the base station AUX
´
LED is on. If not:
Press the AUX button
´
The AUX LED is on now.
Put on the headset.
Play a sound file on the PC.
10
On the headset, press the hook
button
If the sound file is heard in the head-
set, the system is connected properly.
If no sound file is heard, please refer
to "Adjusting to your fixed line
phone" on page 12.
Connecting the base station to a
USB socket of a computer
¸
if you
USB
¸
if you use a
Connect the RJ 9 plug of the acces-
sory cable (not included):
– to the AUX/DHSG socket
additionally connect a usual fixed
line phone or no phone at all
– to the PHONE socket
tionally connect a fixed line DHSG
phone
Connect the cable with the USB plug
to the RJ 45 plug of the accessory
cable (not included):
Connect the USB plug to a USB socket
of the computer.
Install the Sennheiser call control
¿
( ).
software
Sennheiser call control software
manual.
.
¸
if you
¸
if you addi-
as described in the