Type 2; Connecting The Base Station To A Usual Fixed Line Phone; Connecting The Base Station To A Fixed Lined Dhsg Phone - Sennheiser VMX Office Instruction Manual

Type 2:

Connecting the base station to a usual
fixed line phone
¸
Disconnect the handset from your
fixed line phone, but leave it on the
phone.
Plug the free handset cable connector
to the base station
socket µ.
Connect the cable which is already
connected to the base station
(PHONE socket ¸) to the fixed line
phone socket where the handset
cable was connected before.
To test the phone connection:
Pick up the handset.
If the dial tone is heard in the hand-
set, the system is connected properly.
If no dial tone is heard, please refer to
"Adjusting to your fixed line phone"
on page 12.
8
Type 3:
Connecting the base station to a fixed
lined DHSG phone
µ
Connect the accessory cable (RJ 45
DHSG cable, not included) to the
AUX/DHSG socket
phone.
To connect special phones
with call control please ask
HANDSET
your service partner.
To test the phone connection:
Make sure the base station AUX
´
LED is on. If not:
Press the AUX button
The AUX LED
Put on the headset.
On the headset, press the hook
button
If the dial tone is heard in the hand-
set, the system is connected properly.
If no dial tone is heard, please refer to
"Adjusting to your fixed line phone"
on page 12.
and to the DHSG
¿
( ).
´
is on now.
.