Using The Headset; Individually Adjusting The Headset; Switching The Headset On And Connecting It; Switching The Headset Off - Sennheiser Urbanite XL Wireless Instruction Manual

Using the headset

Using the headset

Individually adjusting the headset

Switching the headset on and connecting it

off 3x on

Switching the headset off

on 3x off
12 | URBANITE XL Wireless - Bluetooth headset
For good sound quality and the best possible comfort, you
can adjust the headset to properly fit your head.
Wear the headset so that the headband runs over the
X
top of your head.
Adjust the headset so that
X
– the ear pads rest comfortably against the ears,
– you feel even, gentle pressure around your ears,
– a snug fit of the headband on the head is ensured.
Activate Bluetooth on your mobile device.
X
Move the on/off switch to the position ON.
X
The headset switches on. You hear an ascending se-
"Connected"
quence of beeps.
The LED flashes blue until the headset finds a paired
Bluetooth device to connect to.
Once the connection is successfully established, the
voice prompt "Connected" is announced in the headset.
Move the on/off switch to the position OFF.
X
The LED flashes 3 times red. You hear a descending se-
quence of beeps. The headset switches off.
If the headset has not been used for more than 30 minutes
and no devices are connected, the headset automatically
switches off to conserve battery power.