Limiting The Speaker Volume; Pairing The Headset; Pairing To A Mobile Phone - Sennheiser VMX Office Instruction Manual

Limiting the speaker volume

The VMX OFFICE allows you to limit the
speaker volume of the headset to com-
ply with EU Directive 2003/10/EC.
¶
Push the EU switch
position:
– : The speaker volume is not
reduced.
– : When telephoning via the base
station, the speaker volume is
reduced. Even if you set the volume
at maximum, the volume will never
exceed 85 dB (A) per day as a
time-weighted average
which is in compliance with the
2)
EU Noise Directive
1)
The time-weighted average value is based
on a breakdown of a typical working day
and measured as the sound pressure level
with a B&K HATS (Head and Torso Simula-
tor).
2)
EU Directive 2003/10/EC on the minimum
health and safety requirements regarding
the exposure of workers to the risks arising
from physical agents (noise).

Pairing the headset

Upon delivery, the headset and the base
station are pre-paired together. You can
pair the headset to:
• a mobile phone
¶ • or a similar device with a Bluetooth
"handsfree" or "headset" profile
in the desired
Once you have paired and connected to
a Bluetooth device, the headset will
remember this setting and automati-
cally try to connect to the last used
device every time you open the boom
arm.
• If last connected to a base station, the
headset will try to connect to a base
station when the boom arm is opened
1)
value,
the next time.
• After a firmware update, the headset
.
will automatically connect to a base
station.

Pairing to a mobile phone

Make sure the headset is switched on
and placed close to the mobile phone.
Enter the pairing mode by opening
the microphone boom
ing the volume button
time.
Pairing means forming a pair
of devices by establishing a
trusted relationship. This has
to be done only once.
Connecting means establish-
ing a certain Bluetooth con-
nection to the paired device.
This is done each time you
make or receive a call.
while press-
at the same
13