Charging In The Base Station Charging Slot; Charging With The Vmx Office Car Charger Unit; Charging With A Usb Socket; Charging With The Usb Wall Plug Available As An Accessory - Sennheiser VMX Office Instruction Manual

4. With the USB wall plug available as
an accessory.
If the battery is completely drained, the
headset LED flashes red in the begin-
ning of the charging process. During
charging, the headset LED
red. When charging is complete, the
headset LED lights up blue.
1. Charging in the base station charging
slot
Take off the headset and close the
microphone boom .
The headset is switched off.
Put the headset in the charging
slot ³.
The headset LED lights up red.
When you leave the head-
set on while it is being
charged, the
remains connected to the
base station.
When a call comes in via
the base
remove the charging cable.
The headset will be ready
immediately to answer the
call.
2. Charging with the VMX OFFICE car
charger unit
Take off the headset.
Connect the small plug of the USB
charging cable to the socket for
power supply .
Connect the USB plug of the USB
charging cable to the USB socket of
the VMX car charger unit.
Connect the car charger unit to the
cigarette lighter in the car.

3. Charging with a USB socket

Take off the headset.
lights up
Connect the small plug of the USB
charging cable to the socket for power
supply
Connect the USB plug of the USB
charging cable to a USB socket of a
computer.
4. Charging with the USB wall plug
available as an accessory
Take off the headset.
Connect the small plug of the USB
charging cable to the socket for power
supply
Connect the USB plug of the USB
headset
charging cable to the USB socket of
the power supply
Connect the power supply to the
mains.
station, just

Wearing the headset

Open the microphone boom
The headset is turned on. The head-
set LED
blue.
Put the headset on. The headset can
be worn on either the left or right ear.
Turn
towards your mouth.
.
.
.
starts flashing slowly in
the microphone boom
15