Motorola MOTOWI 4 User Manual page 23

Getting Started
A pair of units is normally supplied pre-configured as a link.
The network connection to a PTP 500 Series Bridge is made via a 100BaseT Ethernet connection.
Power is provided to the ODU over the 100BaseT Ethernet connection using a patented non-
standard powering technique.
Power is fed into the PTP 500 Series Bridge PIDU Plus from the mains via a standard "figure of
eight" mains plug. Connection between the ODU and PIDU Plus is made using standard CAT5e
outdoor UV resistant cable. Connection between the PIDU Plus and the Network Equipment is
made using standard CAT5e cable.
23