Legal Disclaimer; Mounting The Odus; Mounting To Pole Diameters 25Mm (1") To 50Mm (2") - Motorola MOTOWI 4 User Manual

7.5 Legal Disclaimer

IN NO EVENT SHALL MOTOROLA, INC. BE LIABLE FOR ANY INJURY TO ANY PERSONS
OR ANY DAMAGE CAUSED DURING THE INSTALLATION OF THE MOTOROLA PTP 500
SERIES PRODUCT.

7.6 Mounting the ODUs

The ODU mounting bracket is designed to ease installation by fixing the bracket to a pole and
then bringing the ODU into position using a single bolt fixing. The ODU should be mounted using
the following steps ensuring that the cable entry is at the bottom.
The ODU mounting bracket is designed to work with poles with diameters in the range 50mm (2")
to 75mm (3").
Pole diameters of 25mm (1") to 50mm (2") can be accommodated by inverting the back of the
bracket as shown in
When adjustment is complete tighten all bolts to 14Nm (11lb ft).
CAUTION: Do not over tighten the bolts as bracket failure may occur.
Step 1: Mount the
bracket to the pole.
Figure 15.
Figure 15 Mounting to pole diameters
25mm (1") to 50mm (2")
Installation
Step 2: Mate the unit to
the bracket together and
tighten the nut and bolt.
47