System Administration; System Administration Login Page - Motorola MOTOWI 4 User Manual

Receive Modulation Mode: The modulation mode currently being used on the receive channel.
List of all the modulation modes can be found in
are given for each available modulation mode.
Receive Modulation Mode Detail: This supplies the user with information regarding the
receive modulation mode in use. Possible values are:
Running at maximum receive mode
Running at user-configured Max Modulation Mode
Restricted due to byte errors on the wireless link or local Ethernet Tx Fifo Drops
Restricted because a DFS channel change is in progress
Restricted due to telecoms acquisition mode
Restricted due to the low Ethernet link speed
Limited by the wireless conditions
Range: The range
8.3 System Administration Pages
The following menu options are available for the system administrator and can be password pro-
tected. Figure 29
password is not set. Simply click the login button to access the system administration features.
Once the password has been set using the 'Change Password' menu item the system administration
pages will only be available after the user has entered the correct password.
The features that are only available to the system administrator are:
Configuration
Statistics
The Installation Wizard
Software Upgrade
12
The PTP 500 Series Bridge displays range in km by default, if the user would prefer to display range using Miles the
'Distance Units' attribute should be set to imperial, see the "Properties" web page
Web Page Reference
12
between the 500 Series bridge ODUs.
shows the system administration login page. By default a system administrator
Figure 29 System Administration Login Page
Section 14
where data rate calculations plots
65
Section 8.3.14 "Properties".