Graphical Install; Graphical Installation Screen - Motorola MOTOWI 4 User Manual

8.3.5 Graphical Install

To aid the installation of wireless links two graphical installation aids have been introduced in this
500 Series system version.
A PDA installation screen
A larger installation screen available from the main HTTP management interface.
The design of the installation screen has been deliberately kept simple and uncluttered. An example
of the installation screen is shown in
screen have the same content and only differ in size. The PDA installation screen is 232 by 220
pixels to be compatible with the typical size of a PDA screen.
The screen displays the receive power over the last three minutes. This will allow the installer
to slowly sweep the antenna during installation and monitor the variation in signal strength with
angular position. The screen automatically refreshes every three seconds.
The screen also displays the current state of the wireless link in two ways. First, the actual state
of the wireless link is written in the top left corner of the screen. The instantaneous receive power
bar also encodes the state of the wireless link using green to signify that the wireless link is up and
red for all other states.
For the more technically aware, the installation metric is simply the instantaneous receive power
in dBm + 100.
The PDA installation tool is accessed via a hidden URL http:// ip-address /pda.cgi. It should
be noted that this link is only available after the user has logged in as system administrator.
The large screen version of the graphical user interface is available as a submenu option of the
installation wizard.
Web Page Reference
Figure 53. Both the PDA and the large format installation
Figure 53 Graphical Installation Screen
94