GE C70 Instruction Manual page 331

CHAPTER 5: SETTINGS PRODUCT SETUP
When set to "High Priority", the duration of the off message is as specified by the setting, but the on
FLASH MESSAGE TIME
message is displayed as long as the user-programmable pushbutton is activated. While activated, target and other
messages are suppressed. To allow front panel keypad operation, when a keypad button is pressed the message is
supressed for 10 seconds.
— If this setting is enabled, each user-programmable pushbutton state change is logged as an
PUSHBUTTON 1 EVENTS
event into the event recorder.
The figures show the user-programmable pushbutton logic.
Figure 5-57: User-programmable pushbutton logic (Sheet 1 of 2)
5
C70 CAPACITOR BANK PROTECTION AND CONTROL SYSTEM – INSTRUCTION MANUAL 5-127