GE C70 Instruction Manual page 680

REVISION HISTORY
Manual P/N
1601-9015-X2
1601-9015-Y1
1601-9015-Y2
1601-9015-Z1
1601-9015-AA1
1601-9015-AB1
1601-9015-AB2
1601-9015-AC1
1601-9015-AE1
1601-9015-AE3
1601-9015-AF1
1601-9015-AF2
Table D-2: Major changes for C70 manual version AF2 (English)
D
Page Description
--- General revision
--- Added type W CPU module to order codes in chapter 2, installation chapter 3, Replace Front Panel section in chapter 10
--- Added Japanese and Polish languages and modules 6W and 6X to order codes in chapter 2. Module 6W allows 30 contact
inputs, and Module 6X allows 18 outputs.
3-17 Added contact input and contact output modules 6W and 6X to Table 3-3 Contact Input and Output Module Assignments and
to Figure 3-17 Contact Input and Output Module Wiring (Sheet 3 of 3)
5-289 Updated Thermal Overload Protection Logic diagram
Table D-3: Major changes for C70 manual version AF1 (English)
Page Description
--- General revision
--- Updated "faceplate" to "front panel" for consistency and to reflect web site
--- Added graphical front panel option to order codes and specifications in chapter 2, Interfaces chapter 4, Settings chapter 5,
Actual Values chapter 6
--- Added PEAP-GTC and PAP protocols for authenticating user logins when using a RADIUS server. Added to Settings > Product
Setup > Security > RADIUS Authentication Method and to Modbus memory map and F codes.
--- Updated Contact Inputs from 96 to 120 and Contact Outputs from 64 to 72 in Product Description in chapter 2 and FlexLogic
operands table in chapter 5
--- Updated Neutral Time Overcurrent number from 3 to 6 in FlexLogic operands table, settings, features per product table,
Modbus memory map
--- Updated Phase Instantaneous Overcurrent number from 6 to 12 in FlexLogic operands table, settings, features per product
table, Modbus memory map
--- Updated Phase Time Overcurrent number from 3 to 6 in FlexLogic operands table, settings, features per product table,
Modbus memory map
--- Updated Neutral Instantaneous Overcurrent number from 6 to 12 in FlexLogic operands table, settings, features per product
table, Modbus memory map
3-67 Added Connect to a D400 Gateway section
4-43 Updated LED Labelling instructions for the new Front Panel Label Designer
4-50 Added Standard Front Panel section for labelling LEDs and pushbuttons
5-105 Added USB Port section to enable/disable the USB port on the graphical front panel
5-119 Updated User-programmable Pushbuttons section as per specifications
5-140 Updated Breakers section as per specifications
5-146 Updated Disconnect Switches section as per specifications
D-2
C70 revision Release date
6.0x 5 April 2012
7.0x 30 September 2012
7.0x 11 November 2012
7.1x 30 March 2013
7.2x 1 August 2013
7.3x 7 November 2014
7.3x 1 September 2015
7.40x 8 December 2016
7.41x 31 January 2017
7.4x 28 April 2017
7.6x 30 June 2017
7.6x 31 October 2017
C70 CAPACITOR BANK PROTECTION AND CONTROL SYSTEM – INSTRUCTION MANUAL
APPENDIX D: MISCELLANEOUS
ECO
12-3254
12-3529
12-3601
13-0126
13-0401
14-1408
15-2215
16-3319
17-3427
17-3561
17-3779
17-3935