To Back Up The Configuration; Restoring The Configuration; Deleting The Configuration - Honeywell touchpoint pro Operating Manual

Hide thumbs Also See for touchpoint pro:

Table of Contents

4.2 To Back Up the Configuration

Ensure that the destination drive is inserted in the Control Module.

From the System Status screen select the Tool Box icon then System Configuration then System Management.

Re-enter the password and select Login.

Select CCB Management and click on Configuration Backup:

Select the required drive.

The system will display a message 'The configuration backup process might take a few minutes. The User Interface

is not accessible during this time. Do you want to proceed?' Ensure that destination drive is always connected during

this operation.

Once the action is confirmed, the configuration backup process starts and a progress message is displayed. The

backup may take several minutes depending on the system size.

The Configuration backup file is stored on the memory device in:

Please refer to the Touchpoint Pro Technical Handbook.

The Administrator has the option to delete the system configuration. This option is for specific circumstances only, and is

not intended for normal use. See the Touchpoint Pro Technical Handbook for further information.

Pt. No. 2400M2566_1_EN

CONFIGURATION

TPPR Configuration\TPPR_Config_SystemID_<sequence>.bin

e.g.:

TPPR_Config_SYSTEMSPL0003_009.bin

Touchpoint Pro

Operating Manual

Table of Contents

Tppr