Function Setting; Trouble Shootings; Problems And Solutions - Jadever JCL Service Manual

JADEVER SCALE CO., LTD - www.dongminhphat.com

4-8 Function setting

Turn on the power while pressing key
MR TARE
Use or to step through all the available setting items.
G/N/SET
Use to enter the parameter setting.
MR TARE
Then use or
M+/SAVE
Press to save the setting and return, or press
saving.
ZERO/ESC
Press to return normal weighing mode.
Note: Press and hold key SMPL and G/N/SET while powering on the scale. Press the passcode "11" and
press M+/SAVE to enter the advanced parameter setting.

5. Trouble shootings

5-1 Preliminary checks
Is the bubble of the level indicator at the center?
Is the battery electricity capacity ok?
Is power cord connected both with the scale and with the outlet properly?
Is the weighing pan the right one?
Is there anything under the weighing pan?
Is the scale at a flat and steady base?
Are there any vibrating, rotating, and/or reciprocating equipment around?

5-2 Problems and solutions

16
G/N/SET
to set the content values of setting items.
JCL Service Manual - www.cantudong,com
; the scale displays CHECK.
ZERO/ESC
to return without