JADEVER SCALE CO., LTD - www.dongminhphat.com
6-2 Loadcell Replacement
1.Remove the upper housing (refer
to 5-1, step 1-4).
3. Lift the whole load cell support
Module out of the scale.
5. Loosen and remove the 2 hexagonal
socket screws from the upper support.
7. Loosen and remove the 2 Hexagonal
socket screws from Lower support.
9.First solder load cell wire, then install
every connector to the new board.
22
2. Loosen and remove the 4 fixing
screws to remove the load cell support module.
.
4. Disconnect the load cell wire
from main board.
6. Remove the upper support.
8.Prepare and install a new load cell reversibly.
10.Please insert the keypad.
JCL Service Manual - www.cantudong,com