2
3.2 LIFT-START TIG PROCEDURE
With the Stick / Lift-Start TIG selector switch in the
Lift-Start Tig position, start a welding arc as fol-
lows:
1
3
4
5
6
1. Touch the tungsten electrode to the workpiece
at the welding start point.
2. Hold the electrode to the workpiece for no
longer than one second.
3. Slowly lift the electrode from the workpiece. An
arc will form when the electrode is lifted.
3.3 BACK PANEL CONTROLS
7. POWER-ON SWITCH
8. INPUT POWER CORD
9. DATA PLATE
Before connecting, preparing or using
equipment, read Section 1: Safety Precautions.
7
8
10
9