Table of Contents
Advertisement
2.
Starting at one corner, start the side zipper) and zip
it up completely.
NOTE: It may be easier to
begin set up if the canopy leg
is tilted inward.
3.
Attach the Velcro on the front corner. Continue
attaching the Velcro across the entire front of the
screen room.
NOTE: It will be easier to attach
the Velcro if you have a second
person on the outside putting
pressure on the screen room
Velcro.
4.
Start the lifter covers at the top (this will be much easier if done prior to raising the
roof).
5.
Raise the roof of the unit into the camping position. Set all canopy legs in the upright
position.
6.
Finish installing the lifter covers around the lifter posts.
7.
Tie the sides of the screen room to the unit, and the inside of the screen room to the legs.
8.
Secure all canopy legs by installing tent stakes next to each leg so that the "hook" on
the stake is inserted in to the hole on the foot.
Maintenance Record
Repeat on the other side.
Table of Contents
Section 4: Vehicle Operation
67
Hide quick links:
Advertisement
Table of Contents
