Jayco JAY SPORT 2018 Owner's Manual page 62

Section 4: Vehicle Operation
Hinged braces installed on the front of the RV.
Pull out the front bed until it is fully extended.
Install the (hinged) brace ends into the
brackets (C) located under both beds (D).
A second person lifting the bed will make
it easier to insert brace into the bracket.
Repeat the process on the rear bed using the shorter
braces. Make sure the bed is fully extended.
5b - Fixed Brace Set Up
Pull out the front bed making sure it is fully extended.
Install the shorter bed braces for the front bed.
The bent end of the bed brace(s) fit into the
brackets under the bed (A) The straight tab
portion of the brace fits into the brackets
welded on the tongue (B) Lift the bed
slightly to allow the braces to be inserted
into the brackets.
54
Maintenance Record Table of Contents