Jayco JAY SPORT 2018 Owner's Manual page 121

Camping trailers
Table of Contents

Advertisement

Oven (if so equipped)
The propane gas oven must have 12-volt power to operate. If you have any questions, contact
your dealer or our customer service department. Do not use the oven as a storage area.
Refer to the manufacturer's user guide for detailed operation, cleaning and safety
information.
Gas BBQ Grill (If So Equipped)
Be sure to read, understand and follow all information supplied with your
recreation vehicle concerning the use of propane before operating the
BBQ grill. The propane hose must be correctly connected before lighting
the grill. Failure to follow instructions supplied by the grill manufacturer,
or use of any components other than those originally supplied with the
grill, could result in death or serious injury.
If you smell gas: Shut off gas to the appliance; extinguish any open
flame; open lid; if odor continues, immediately call you gas supplier or
your fire department.
The maximum weight limit for the bracket supporting your BBQ grill is
50 lbs. This limit includes the weight placed on the BBQ grill. Exceeding
this weight limit could result in injury or property damage.
The BBQ grill is for use outside of the recreational vehicle. Never use
this grill inside a compartment or inside of the recreational vehicle.
Before operating the BBQ grill, make sure that it is securely mounted
on the support rail attached to the side of the recreational vehicle (if so
equipped) or the bumper mounting bracket (if so equipped).
Always open hood before turning on gas and lighting burner, failure to open
the hood before lighting could cause an explosion causing property damage,
injury, or even death.
Depending on your model, your grill will be mounted with either a bumper mount system,
or a rail mount on the side of your recreational vehicle.
Bumper mount (if so equipped)
Insert the grill mounting bar (with the pins)
into the bracket (mounting tube) on the rear
bumper of the recreation vehicle.
Insert the pin through the hole in the
bracket and mounting bar. The pin must
be installed to insure the mounting bar is
secure during use.
Tighten the T-handle on the bracket mounted to the bumper.
Maintenance Record


Table of Contents
Section 10: Appliances
Bumper mounting bracket
113

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents