Connecting The Buttons To The Rap-610D Short Connection Cable; Configuring The Button Code (Operating Mode 1) - golmar Nexa Modular Gb2 User Manual

NEXA MODULAR GB2 AUDIO AND VIDEO DOOR ENTRY SYSTEM - BUILDING
INSTALLATION OF THE DOOR PANEL

Connecting the buttons to the RAP-610D short connection cable:

Use the RAP-610D connection cable to connect the buttons between the sound
module and the EL610D button module and between EL610D button modules when
the distance between modules to be connected is greater due to the composition of
the door panels.
Configuring the button code (operating mode 1):
The EL610D button module needs to be configured in order to assign
a call code to the buttons. Carry out this configuration with the
DIP switch located at the back of the module.
Depending on the configuration option selected, the buttons will be
assigned with a certain call code.
To configure the call code on the monitors. It is worth noting the call
code of each button, as shown in the table below.
IMPORTANT: Sound module factory set to
- Up to 23 monitors (Vesta2)/apartments per installation (mixed installations with telephones up to 23 elements).
- Up to 18 monitors (Vesta7)/apartments per installation (mixed installations with telephones up to 18 elements).
- Up to 32 telephones (T562/Nhea)/apartments per installation (audio door entry system installation audio only).
Dip1
1 On
2 Off
3 Off
Dip1
1
On
2 Off
3 Off
4 Off
5 Off
6 Off
7 Off
(1)
Button 1 - button 10
P1- P10:
Important: Select a different configuration option for each EL610D module.
( )
*
Factory setting.
Double button module codes
DIP switch
Dip2 Dip3 Dip4 Dip5 Dip6 Dip7 Dip8
Off Off Off Off Off
On Off Off Off Off
Off On Off Off Off
Single button module codes
Dip2 Dip3 Dip4 Dip5 Dip6 Dip7 Dip8
Off Off Off Off Off
On Off Off Off Off
Off On Off Off Off
Off Off On Off Off
Off Off Off Off
On
Off Off Off Off On
Off Off Off Off Off
'operating mode 1' , (see page 26)
EL610D button module
P1 P2 P3 P4 P5 P6 P7
Off On 11 2
Off On 21 12 13
Off On 31 22 23
P1 P3 P5 P7 P9
Off 1 2
On
Off On 6 7
Off On 11 12 13
Off On 16 17 18
Off 21 22 23
On
Off On 26 27 28
_
On On 31
( )
*
Button code
3 4 5 6 7
14 15 16 17
24 25 26 27
(1)
( )
3 4 5
*
8 9 10
14 15
19 20
24 25
29 30
_ _ _
10
P8 P9 P10 (1)
( )
8 9 10
*
18 19 20
28 29 30