Starter Motor Schematic Diagram - PIAGGIO Beverly 300 i.e. Service Station Manual

Electrical system
- Start the engine and rev it up to a high engine speed while reading the value on the pincer.
With an efficient battery a value must be detected: > 20A
Specification
Voltage
Starter motor
KEY
1. Starter motor
2. Starter relay
3. Battery
4. Fuse No. 1
5. Ignition switch contacts
6. Fuse No. 5
7. Stop buttons
8. Starter button
9. Injection ECU
WARNING
ALL CONTINUITY TESTS MUST BE CARRIED OUT WITH THE CORRESPONDING CONNECTORS
DISCONNECTED.
1) Check if there is continuity of the Red cable connecting the battery, the start-up solenoid and the
starter motor.
ELE SYS - 86
VOLTAGE REGULATOR/RECTIFIER
Type
Beverly 300 i.e.
Desc./Quantity
Non-adjustable three-phase transistor
14 to 15V at 5000 rpm with lights off