Coolant Temperature Sensor - PIAGGIO Beverly 300 i.e. Service Station Manual

Injection

Coolant temperature sensor

1
2
3 Water temperature sensor
With the connector on the control unit side discon-
nected and the coolant temperature sensor con-
nector connected, check that the resistance val-
ues between pin 9 and the ground lead correspond
with the engine temperature.
20° = 2500 ± 100 Ω
80° = 308 ± 6 Ω
With the connector on the control unit side discon-
nected and the coolant temperature connector dis-
connected, check the insulation between the light-
blue/green cable and ground lead.
INJEC - 196
TEMPERATURE SENSOR
Specification
Instrument panel
Injection ECU
Beverly 300 i.e.
Desc./Quantity