Radiator Fan; Expansion Tank - PIAGGIO Beverly 300 i.e. Service Station Manual

Beverly 300 i.e.

Radiator fan

To remove the radiator electric fan, proceed as
follows:
- Remove the front wheel housing.
- Obtain a suitably sized container and drain the
cooling system by removing the indicated clamp.
Open the expansion tank cap to facilitate draining;
- Detach the radiator from the circuit pipes;
- Unscrew the indicated screw and remove the ra-
diator, lifting out of its seat.
See also
Front wheel housing

Expansion tank

To remove the expansion tank, proceed as fol-
lows:
- Remove the leg shield back plate;
- Drain the cooling system by removing the indi-
cated clamp;
- Unscrew the indicated screw and remove the ex-
pansion tank.
Chassis
CHAS - 277