Cylinder Assy. And Timing System; Removing The Intake Manifold; Removing The Rocker-Arms Cover; Removing The Timing System Drive - PIAGGIO Beverly 300 i.e. Service Station Manual

Engine

Cylinder assy. and timing system

Removing the intake manifold

- Undo the three screws with an anti-tampering
device.

Removing the rocker-arms cover

- Remove the five screws shown in the figure.
- Remove the entire head cover.

Removing the timing system drive

- Remove the oil pump control gear and the pinion
separation washer as described in the «Engine/
Lubrication/Oil pump» section.
- Undo the central screw and collect the washer.
Undo the two fixing screws to the cylinder and re-
move the tensioner together with the gasket.
ENG - 138
Beverly 300 i.e.