Siemens SIMATIC ET 200SP Manual page 165

No. Function or command to the host interface (symbolic
representation)
25 AImage, Status = Read_AIDI()
26 Status = Write_AODI(AImage)
27 String, Status = Read_ParamStr(S_Addr)
28 Status = Write_ParamStr(S_Addr, String)
29 String, Status = Read_DiagStr(S_Addr)
30 String, Status = Read_IdentStr(S_Addr)
B Supported slave profiles
1 Support of extended address mode
2 Support of Combined transaction type 1 integrated
(S−7.3 only)
3 Full support of Combined transaction type 1 integrated
4 Support of Combined transaction type 2 integrated
5 Support of Combined transaction type 3 integrated
6 Support of Combined transaction type 4 integrated
7 Support of Combined transaction type 5 integrated
AS-Interface master CM AS-i Master ST (3RK7137-6SA00-0BC1)
Manual, 07/2017, A5E02655262020A/RS-AD/004
AS-Interface Protocol Implementation Conformance Statements
A.1 AS-Interface Protocol Implementation Conformance Statement (PICS)
M4
X
X
X
X
X
X
X
X
X
X
X
X
X
Remark / implementation of the function with
See Section Description of the AS-i commands
(Page 103).
Through automation system access to the I/O
data of the AS-i master
See "Read_Parameter_String" in Section
Description of the AS-i commands (Page 103)
See Section Description of the AS-i commands
(Page 103)
See Section Description of the AS-i commands
(Page 103)
See Section Description of the AS-i commands
(Page 103)
—
—
Support for profiles 7.3 and 7.4 only.
—
—
—
—
165