No. 01: Get_Permanent_Parameter - Siemens SIMATIC ET 200SP Manual

Using the command interface
9.4 Description of the AS-i commands
9.4.2

No. 01: GET_Permanent_Parameter

Significance
This command reads a slave-specific parameter value that has been saved in EEPROM of
the CM AS-i Master ST.
Structure of the job data in the send buffer
Table 9- 8 Structure of the job data in the send buffer
Byte Significance
0 Command number: 01
1 Slave address
Structure of the reply data in the receive buffer
Table 9- 9 Structure of the reply data in the receive buffer
Byte
Bit 7
0
108
H
0
Significance
Bit 4 Bit 3
Configured parameters
AS-Interface master CM AS-i Master ST (3RK7137-6SA00-0BC1)
Manual, 07/2017, A5E02655262020A/RS-AD/004
Bit 0