Online Functions In The Tia Portal; Switching From One Operating Mode To Another - Siemens SIMATIC ET 200SP Manual

5.4

Online functions in the TIA Portal

5.4.1

Switching from one operating mode to another

STEP 7
In
"configuration mode" under "Functions". There are two buttons:
● "Configuration mode"
● "Protected operation"
The LEDs on the AS-i master and in
AS-i master. You will find additional information in Section "Meaning of the LEDs (Page 64)".
The operating mode can only be switched when the CPU is in "STOP" state.
Note
Online functions
The online functions can only be performed when at least the basic configuration has been
completed and the configuration has been loaded into the ET 200SP station.
AS-Interface master CM AS-i Master ST (3RK7137-6SA00-0BC1)
Manual, 07/2017, A5E02655262020A/RS-AD/004
"Online" > "Diagnostics", you can switch between "protected operation" and
5.4 Online functions in the TIA Portal
STEP 7
indicate the current operating mode of the
Configuring
37