Control Connections; Control Cables; Assignment Of The Control Terminals - Lenze 8201 Operating Instructions Manual

Show/Hide Bookmarks
Installation
4.2.3

4.2.3.1 Control cables

4.2.3.2 Assignment of the control terminals

FIG 4-5
4-10
820XBA1097

Control connections

-
We recommend the unilateral screening of all cables for
analog signals to avoid signal distortion.
-
Connect the screens of the control cables as follows:
- 820X:
On the front FAST-ON connector.
-
If the control cables are interrupted (terminal strips, relays),
the screens must be reconnected over the shortest possible
distance.
-
Connnect the fixing screw of the setpoint potentiometer to
PE.
K35.0026
Position of the control terminals