Fuses And Cable Cross-Sections; Single Drives With 150 % Overload; Dimensions - Lenze 8201 Operating Instructions Manual

Show/Hide Bookmarks
Technical Data

3.3 Fuses and cable cross-sections

3.3.1
Type Type
8201
8202
8203
8204
Values in square brackets are valid for motor connection
1)

3.4 Dimensions

3-4
820XBA1097

Single drives with 150 % overload

The table values are valid for the operation of 82XX controllers as
single drives with a matching motor and 150 % overload.
Mains input L1, N, PE / motor connection U, V, W, PE
Operation without mains filter/mains choke
Fuse E.l.c.b.
F1, F2, F3
VDE UL VDE
M 10A - C 10A
M 15A - C 16A
M 20A - C 20A
- - -
Observe national and regional regulations (e. g. VDE/EVU)!
The controller dimensions depend on the mechanical installation
(see chapter 4.1).
Operation with mains filter/mains choke
Cable Fuse
1)
cross-section F1, F2, F3
2
mm AWG VDE UL
1.5 15 M 10A -
2.5 13 M 15A -
4 11 M 15A -
- - M 20A -
E.l.c.b. Cable
1)
cross-section
2
VDE mm AWG
C 10A 1.5 15
C 16A 2.5 13
[1.5] [15]
C 16A 2.5 13
[1.5] [15]
C 20A 4 11
[2.5] [13]