Tightening Torques Of The Power Terminals; Control Connections - Lenze 8600 series Operating Instructions Manual

5.1.1 Tightening torques of the power terminals

Tightening Nm
Ibfin)
5.2

Control connections

Layout:
44 45 KIlK14Al
Control terminals
Input of digital frequency/incremental encoder
x5:
LECOM interface (RS232/485)
X6:
X8: 2nd input of digital frequency/incremental encoder
(Option)
Output of digital frequency (Option)
Field bus connections
(Option, e.g. 2110lB for InterBus-S)
Displays for field bus Options
Note
Always connect the plug-in terminals (accessory kit) to the plug
connectors Xl to X4.
When not using the interface plugs (plug-in connectors) X5 and X6
lt is possible to Change the functions of cetiain control terminals
using switches (See chapters 5.2.1 to 5.2.7, page 30ff). To adjust
the switches, remove the cover of the device.
In addition to this, there are numerous possibilities to Change the
inputs and Outputs of the device using Codes (See page 81ff).
Nm
Nm
Ibfin) (13.3...16 Ibfin) (53,..70Ibfin)
Ibfin)
29