10.2.6
Drives
10.2.6.1
Removing and installing a DVD-ROM drive
Procedure
1. Loosen the 4 screws (1).
Figure 10-3
Drive with housing
2. To remove the housing of the drive, hold down the base plate (2) of the drive securely
3. Lift the housing (3) from the drive.
4. Detach the IDE plug (1) and the power supply plug (2).
SIMATIC Panel PC 577
Operating Instructions, Release 04/2006, A5E00798484-01
and slide the housing (3) to the right until the eyes (4) are free.
10.2 Removing and installing hardware components
Servicing and maintenance
10-17