Mounting the device
To reinstall the device, follow the reverse procedure.
Caution
Please note the following. Device malfunctions may otherwise occur.
• Ensure that the ribbon cable is plugged into the correct sockets.
• Ensure that the ribbon cable is not kinked or crimped.
• Check the switch settings (1). Ensure that the switch is set to match the settings in the
Figure 10-16 Separating the control unit from the computer unit, switch settings and connections
SIMATIC Panel PC 577
Operating Instructions, Release 04/2006, A5E00798484-01
following table.
10.2 Removing and installing hardware components
Servicing and maintenance
10-35